Shenzhen OptoElectronics Co., Ltd.
Shenzhen OptoElectronics Co., Ltd.
Add to Cart
10Gb/s Short-Wavelength Pluggable SR SFP Transceiver
● Hot pluggable
● 10Gb/s serial optical interface
● Up to 300m on 50/125um MMF(2000MHZ.KM)
● Compliant with SFP+ MSA
● SFP MSA package with duplex LC connector
● Digital Diagnostic Monitor Interface
● Very low EMI and excellent ESD protection
● High transmission margin
● +3.3V single power supply
● Below 1W power consumption
● SFP mechanical interface
● Wide data-rate range
Description
●CSP08V9-11-55 optical transceivers are designed for 10Gb/s serial optical interfaces for data communications with multimodemode fiber (MMF). The transceiver can support 9.953G b/s to 11.1Gb/s
● The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for datacom and storage applications.
Standard
● SFP+ MSA Compliant
● SFF-8472 reversion 9.5 compliant
● IEEE802.3-2005 compliant
● Telcordia GR-468-CORE compliant
● FCC 47 CFR Part 15,Class B compliant
● FDA 21 CFR 1040.10 and 1040.11,class1 compliant
● RoHS compliant
Applications
● 10G Base-SR/SW ● 10G Fiber Channel ● Other optical links
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note | |
| Data Rate | Ethernet | 10.3125 | Gb/s | ||||
| Fiber Channel | 10.518 | ||||||
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | ||
| Supply Current | Icc | 300 | mA | ||||
| Operating case temperature | Tc | 0 | 70 | ℃ | |||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note | |
| Diff. input voltage swing | 500 | mVpp | Note 1 | ||||
| Tx Disable input | H | VIH | 2.0 | Vcc+0.3 | V | ||
| L | VIL | 0 | 0.8 | ||||
| Tx Fault output | H | VOH | 2.0 | Vcc+0.3 | V | Note 2 | |
| L | VOL | 0 | 0.8 | ||||
| Input Diff. Impedance | Zin | 100 | Ω | ||||
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
|
Diff. output voltage swing |
|
|
500 |
|
mVpp |
Note 3 |
|
Rx LOS Output |
H |
VOH |
2.0 |
|
Vcc+0.3 |
V |
Note 2 |
L |
VOL |
0 |
0.8 |
||||
| Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
| Operating wavelength |
|
760 |
|
860 |
nm |
|
| Sensitivity | Psen | -9.9 | dBm | Note 3 | ||
| Min. overload |
Pimax |
-1 |
|
|
dBm |
|
| LOS Assert | LosA |
-24 |
|
|
dBm |
|
| LOS De-assert |
LosD |
|
|
-12 |
dBm |
|
| LOS Hysteresis |
LosH |
0.5 |
|
4 | dB |
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Operating wavelength | 840 | 850 | 860 | nm | ||
| Ave. output power (Enabled) | Po | -6 | -1 | dBm | Note 1 | |
| Extinction Ratio | ER | 3.0 | 5.0 | dB | Note 1 | |
| RMS spectral width | Δλ | 0.45 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | Note 2 | ||
| Optical modulation amplitude | OMA | -2.8 | dBm | |||
| Dispersion penalty | 3.9 | dB | ||||
| Output Optical Eye | IEEE 802.3-2005 Compliant | |||||
Serial Interface for ID and DDM
The SFP modules implement the 2-wire serial communication protocol as defined in the SFP MSA.
The serial ID information of the SFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C interface at address A0h and A2h. The memory is mapped in Table 1. Detailed ID information(A0h) is listed in Table 2. And the DDM specification(A2h) is described in Table 3. For more details of the memory mOL and byte definitions, please refer to the SFF-8472 (Rev 9.3, Aug. 2002), “Digital Diagnostic Monitoring Interface for Optical Transceivers”. The DDM parameters have been internally calibrated.
| Digital Diagnostic Memory MOL (Specific Data Field Descriptions) | |||||
| 2 wire address 1010000X (A0h) | 2 wire address 1010001X (A2h) | ||||
| Address | Information | Address | Information | ||
| 0~95 | Serial ID Defined by SFP MSA (96 bytes) | 0~55 | Alarm and Warning Thresholds (56 bytes) | ||
| 56~95 | Calibration Constants (40 bytes) | ||||
| 96~127 | Vendor Specific (32 bytes) | 96~119 | Real Time Diagnostic Interface (24 bytes) | ||
| 120~127 | Vender Specific (8 bytes) | ||||
| 128~255 | Reserved,SFF8079 (128 bytes) | 128~247 | User Writable EEPROM (120 bytes) | ||
| 248~255 | Vender Specific (8 bytes) | ||||
| EEPROM Serial ID Memory Contents (A0h) | ||||
| Data Address |
Size (Bytes) |
Name of Field |
Value(Hex) | Description of Field |
| BASE ID FIELDS | ||||
| 0 | 1 | Identifier | 03 | SFP |
| 1 | 1 | Ext. Identifier | 04 | MOD4 |
| 2 | 1 | Connector | 07 | LC |
| 3-10 | 8 | Transceiver | 00 00 00 00 00 00 00 00 | |
| 11 | 1 | Encoding | 01 | NRZ |
| 12 | 1 | BR, Nominal | 67 | |
| 13 | 1 | Reserved | 00 | |
| 14 | 1 | Length(9µm,km) | 00 | |
| 15 | 1 | Length (9µm) | 00 | |
| 16 | 1 | Length (50µm) | 52 | 82m 50125um 500MHZ.KM MMF |
| 17 | 1 | Length (62.5µm) | 21 | 33m 62.5/125um 200MHZ.KM MMF |
| 18 | 1 | Length (Copper) | 00 | |
| 19 | 1 | Reserved | 00 | |
| 20-35 | 16 | Vendor name | ||
| 36 | 1 | Reserved | 00 | |
| 37-39 | 3 | Vendor OUI | 000000 | |
| 40-55 | 16 | Vendor PN | ||
| 56-59 | 4 | Vendor rev | 31 30 20 20 | 10 |
| 60-61 | 2 | Wavelength | 03 52 | 850nm |
| 62 | 1 | Reserved | 00 | |
| 63 | 1 | CC_BASE | XX | Check code for Base ID Fields |
| EXTENDED ID FIELDS | ||||
| 64-65 | 2 | Options | 001A | Los,Tx_falt, Tx_diable |
| 66 | 1 | BR, max | 00 | Upper bit rate margin, units of % |
| 67 | 1 | BR, min | 00 | Lower bit rate margin, units of % |
| 68-83 | 16 | Vendor SN | xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx |
Serial number(ASCII) |
| 84-91 | 8 | Date code | xx xx xx xx xx xx xx xx | Vendor’s manufacturing date code (ASCII) |
| 92 | 1 | Diagnostic Monitoring Type | 68 | Digital diagnostics and internal calibration |
| 93 | 1 | Enhanced Options | 80 | Alarm/Warning flags implemented |
| 94 | 1 | SFF-8472 Compliance | 04 | |
| 95 | 1 | CC_EXT | xx | Check code for the Extended ID Fields |
| VENDOR SPECIFIC ID FIELDS | ||||
| 96-127 | 32 | Vendor Specific | Vendor Specific EEPROM | |
| 128-255 | 128 | Reserved | Reserved for SFF-8079. | |
Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the related document of SFF-8472 Rev 9.4.
| DDM Specification | |||
| Parameter | Range | Accuracy | Calibration |
| Temperature | -10 ～ +80°C | ±3°C | Internal |
| Voltage | 3.0 ～ 3.6V | ±3% | Internal |
| Bias Current | 0 ～ 15mA | ±10% | Internal |
| TX Power | -7 ～ 0dBm | ±2dB | Internal |
| RX Power | -15 ～ 0dBm | ±2dB | Internal |
| PIN # | Name | Function | Notes |
| 1 | VeeT | Module transmitter ground | Note1 |
| 2 | Tx Fault | Module transmitter fault | Note 2 |
| 3 | Tx Disable | Transmitter Disable; Turns off transmitter laser output | Note 3 |
| 4 | SDL | 2 wire serial interface data input/output (SDA) | |
| 5 | SCL | 2 wire serial interface clock input (SCL) | |
| 6 | MOD-ABS | Module Absent, connect to VeeR or VeeT in the module | Note 2 |
| 7 | RS0 | Rate select0,optionally control SFP+ receiver. When high, input data rate >4.5Gb/s;when low, input data rate <=4.5Gb/s | |
| 8 | LOS | Receiver Loss of Signal Indication | Note4 |
| 9 | RS1 | Rate select0,optionally control SFP+ transmitter. When high, input data rate >4.5Gb/s;when low, input data rate <=4.5Gb/s | |
| 10 | VeeR | Module receiver ground | Note 1 |
| 11 | VeeR | Module receiver ground | Note 1 |
| 12 | RD- | Receiver inverted data out put | |
| 13 | RD+ | Receiver non-inverted data out put | |
| 14 | VeeR | Module receiver ground | Note 1 |
| 15 | VccR | Module receiver 3.3V supply | |
| 16 | VccT | Module transmitter 3.3V supply | |
| 17 | VeeT | Module transmitter ground | Note 1 |
| 18 | TD+ | Transmitter inverted data out put | |
| 19 | TD- | Transmitter non-inverted data out put | |
| 20 | VeeT | Module transmitter ground | Note1 |