Shenzhen OptoElectronics Co., Ltd.
Shenzhen OptoElectronics Co., Ltd.
Add to Cart
| Wavelength | 1310nm / 1550nm / CWDM |
| Output Power | -6~-1dBm |
| Rx sensitivity | <-18dBm |
| Transmission Distance | SM fiber 10+km , MM fiber 300m |
| Optical connector | Dul LC /FC/ST/SC/MX/ Lemo / Neutrik (optional) |
SDI input/output:
| Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
| Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
| Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
| SDI interface | BNC 75 Ohm |
Intercom:
| Camera Optic Adaptor | |
| Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
| Microphone | Mic inputs with mute and pre-amps |
| Headphone | with volume up or down |
| Optic Base Station | |
| Interface | Input:3pin XLR Female , Output: 3pin XLR Male or 5pin XLR or 3.5mm headset jack |
| Audio | Balance or unbalance line level |
Tally:
| Camera Optic Adaptor | |
| Interface | 4pin air head or 3pin mini XLR |
| Output | Dry Contact Closure or wet +12V |
| On: short or +12V Off: open or 0V | |
| Optic Base Station | |
| Interface | DB9(Male) |
| Input | Dry Contact Closure or wet |
| On: short to GND or TTL low Off: open or TTL high | |
Remote:
| Camera Optic Adaptor | |
| Interface | 8pin air head or 8pin sony’s remote interface |
| Data | RS422 /RS232/RS485 |
| Optic Base Station | |
| Interface | DB9(Male) or 8pin sony’s remote interface |
| Data | RS422 /RS232/RS485 |
| RJ45 |