Shenzhen OptoElectronics Co., Ltd.
Shenzhen OptoElectronics Co., Ltd.
Add to Cart
EFP To Fiber Convertor includes a Camera Optic Adaptor and a Optic Base Station. The system transports a 3G/HD-SDI signal from the camera to the Base Station and a return video (3G/HD-SDI or CVBS), Remote control data, genlock, intercom, tally, audio and 10/100M Ethernet are also provided. The system puts all of the signals needed for multi-camera 3G/HD-SDI production onto a SM / MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
Specifications:
General index
| Work Temp | -25°C to 55°C |
| Storage Temp | -40°C to 85°C |
| humidity | 0 ~ 95% (non-condensing) |
| Camera Optic Adaptor | |
| Input power | DC 12~19V |
| Power consumption | 10W |
| Net weight | 1kg |
| Appearance size | 160mm*100mm*44mm(without V-mount / A-mount) |
| Optic Base Station | |
| Input power | AC90~240V |
| Power consumption | 10W |
| Net weight | 3kg |
| Appearance size | 19” 1U standard rack mount |
Optical:
| Wavelength | 1310nm / 1550nm / CWDM |
| Output Power | -6~-1dBm |
| Rx sensitivity | <-18dBm |
| Transmission Distance | SM fiber 10+km , MM fiber 300m |
| Optical connector | Dul LC /FC/ST/SC/MX/ Lemo / Neutrik (optional) |
SDI input/output:
| Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
| Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
| Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
| SDI interface | BNC 75 Ohm |
Intercom:
| Camera Optic Adaptor | |
| Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
| Microphone | Mic inputs with mute and pre-amps |
| Headphone | with volume up or down |
| Optic Base Station | |
| Interface | Input:3pin XLR Female , Output: 3pin XLR Male or 5pin XLR or 3.5mm headset jack |
| Audio | Balance or unbalance line level |
Tally:
| Camera Optic Adaptor | |
| Interface | 4pin air head or 3pin mini XLR |
| Output | Dry Contact Closure or wet +12V |
| On: short or +12V Off: open or 0V | |
| Optic Base Station | |
| Interface | DB9(Male) |
| Input | Dry Contact Closure or wet |
| On: short to GND or TTL low Off: open or TTL high | |
Remote:
| Camera Optic Adaptor | |
| Interface | 8pin air head or 8pin sony’s remote interface |
| Data | RS422 /RS232/RS485 |
| Optic Base Station | |
| Interface | DB9(Male) or 8pin sony’s remote interface |
| Data | RS422 /RS232/RS485 |
Ethernet:
| Work mode | Full duplex/half duplex |
| Data Rate | 10/100Mbps(AUTO) |
| connection terminal | RJ45 |